- 非IC关键词
企业档案
- 相关证件：
- 会员类型：普通会员
- 王美月
- 电话：0755-61665296/61665297
- 手机：13798387298
- 地址：深圳宝安22区嘉宝工业区B栋6楼
- 传真：0755-61665296-809
- E-mail：1561230129@qq.com
产品分类
您的当前位置：深圳市佳宏精密技术有限公司 > 元器件产品
产品信息
详细介绍:
| Model | JH-FS8602 | ||||||
| DC Output (O/P) |
DC voltage | 12V | |||||
| Rated current | 5A | ||||||
| Current range | 0~5A | ||||||
| Ripple & Noise (max) | 120mVp-p | ||||||
| Rated power | 60W | ||||||
| Voltage tolerance | ±5.0% | ||||||
| Setup, rising time | 500ms, 50ms at full load | ||||||
| Hold up time | >5ms at full load | ||||||
| Input (I/P) |
Rated Voltage range | 90~264VAC | |||||
| 100-240Vac | |||||||
| Frequency range | 47~63Hz | ||||||
| Efficiency (average) | >84% (min) | ||||||
| AC current | 1.3A(max) | ||||||
| Leakage current | < 0,25 mA at 250 V | ||||||
| Inrush current | < 60 A at 230 V | ||||||
| Protection | Short circuit t*e | Hiccup mode , but can\'t damage for permanent short circiut. | |||||
| Over voltage t*e | 115~150% rated voltage and Shut off O/P voltage, re-power on to recover | ||||||
| Over load t*e | 115~200% rated output power and Hiccup model, no damage, automatic recover after removing over load condition | ||||||
| Environment | Working temp | 0 ~+40℃ | |||||
| Working humidity | 20 ~90% RH non-condensing | ||||||
| Storage temp & humidity | -20~+85℃, 10~95% RH | ||||||
| Vibration | EN 61131-2 | ||||||
| Safty & EMC | Standards | design refer to EN60950 | |||||
| Withstand voltage | I/P-O/P: 3KVAC, 5mA, 60S ( 2pin); I/P-O/P: 1.5KVAC, 5mA, 60S (3pin); | ||||||
| Isolation resistance | I/P-O/P: 100M ohms/500VDC | ||||||
| EMC | EN55022 Cl* B | ||||||
| Others | Certification | N/A | |||||
| MTBF | 300 Khrs, Mil-HDBK-217F(25℃) | ||||||
| Connection | 2pin plug or 3pin; H03VV-F 0.75mm²x2 wires | ||||||
| Dimension | 128*68*45mm (L*W*H) | ||||||
| Weight | 650g | ||||||
| IP rating | IP67 | ||||||
| RoHS compliance | Yes | ||||||
| Warranty Period | 2 year | ||||||
| Note: | 1. All parameters *T specially mentioned are measured at 230VAC input and rated load and 25℃ of ambient temperature. | ||||||
| 2. Ripple & Noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | |||||||